Complete Metallurgical Laboratory's that include: Sectioning, Mounting, Grinding, Polishing, Microscopic Examination, Image Capture and Measuring Capabilities for Less than $10,000

LAB PACKAGES with larger Cut-off Saws, Mounting Press's & Micro Hardness Testers available

Turnkey Metallurgical PCB Laboratory $12498 , less 20% Lab Package Discount $9998.00 

#MPCBL includes:

• PCS-600 6" Diamond Wet Cutting PCB Table Saw
• FMK-5 Acrylic 2 Part , 10 min. Mounting System with Molds
• #56021 Mecapol 3B2 Dual Wheel, 2 speed (150+300 rpm) Grinder/Polisher.
• MXPT Inverted PolarizingTrinocular Microscope with 50X,100X,200X & 400X Powers
• MVOPTID 5 mega-pixel Digital Microscope Camera with PC & Measuring Software
• Laboratory Supply Package includes: Grinding & Polishing Supplies 

This Turnkey Lab is set up for you to open the boxes, set the equipment in place and go right to work. This Lab is designed for medium to high output Printed Circuit Labs and allows the technicians to quickly section to the point of interested (with no deformation) mount in 10 minutes, then grind on one wheel and polish on the other. Final examination is done on the Inverted microscope, Measured on the PC screen then easliy incorporated into a report     

Call 800-243-9776 (860-653-7201) or email to get a detailed quotation

 Turnkey Standard Metallurgical Laboratory $12498 Less 20% Lab  Package Discount for $9998.00

  #MSTLP includes:

• CS600A 6" Abrasive Wet Cutting Automatic Cut-off Machine.
• EZ-1, 10 min. Epoxy Mounting System complete with Hot Plate, Resin, Mixing Buret and Rubber Molds 
• #56006 Mecapol 2B2 Single Wheel,2 speed (150+300 rpm) Grinder/Polisher. With 2 ea. 8" Wheels
• MXLT Inverted Trinocular Microscope with Plan Achromatic Objective, 50X,100X,200X & 400X Powers
• MVOPTID 5 mega-pixel Digital Microscope Camera with PC & Measuring Software
• Laboratory Supply Package includes: Grinding & Polishing Supplies  

This Turnkey Lab is set up for you to open the boxes, set the equipment in place and go right to work. This Lab is designed for low to medium output  Metallurgical Labs and allows the technicians to quickly section to the point of interested (with no deformation) mount in 15 minutes, then grind on one wheel and polish on the other. Final examination is done on the Inverted microscope, Measured on the PC screen then easliy incorporated into a report. 

Call 800-243-9776 (860-653-7201) or email to get a detailed quotation